Icom ID-51A Advanced Instructions page 351

Previous view
18
OPTIONS
Option list (Continued)
■
D BATTERY PACK/CASE
• BP-271 -
li ion battery pack
7.4 V/1150 mAh (Min.) Lithium ion battery pack.
Battery life : Approximately 4.5 hours* (FM/DV)
• BP-272 -
li ion battery pack
7.4 V/1880 mAh (Min.) Lithium ion battery pack.
Battery life : Approximately 7.5 hours* (FM)
Approximately 6 hours* (DV)
• BP-273
battery case
Battery case for three LR6 (AA) alkaline batteries.
*At High power, TX : RX: Standby = 1:1:8
D CHARGERS
• BC-167SA/SD/SV
battery charger
For regular charging of the BP-271 or BP-272 Lithium
ion battery pack.
Same as the supplied one. (Not supplied with some
transceiver version.)
D CLONING SOFTWARE
• CS-51
cloning software
Use this software to program settings such as mem-
ory channels and Menu mode contents quickly and
easily through your USB port (OPC-2218LU).
• OPC-2218LU
data communication cable
Allows low-speed data communication in the DV mode,
or data cloning with CS-51 (free download software).
Approved Icom optional equipment is designed for
optimal performance when used with an Icom trans-
ceiver.
Icom is not responsible for the destruction or damage
to an Icom transceiver in the event the Icom transceiv-
er is used with equipment that is not manufactured or
approved by Icom.
(free download)
D OTHER OPTIONS
• SP-13
earphone
Provides clear audio in noisy environments.
• HM-75A/HM-153/HM-166/HM-186
SP-13
+OPC-2144
earphone
HM-75A : Remote control Speaker microphone
HM-153 : Earphone microphone
HM-166 : Earphone microphone
HM-186 : Speaker microphone
SP-13 : Earphone
OPC-2144 : Allows you to connect the HM-75A/
HM-153/HM-166/HM-186/SP-13 to the
transceiver.
• HS-94/HS-95/HS-97
+OPC-2006LS
plug adapter cable
HS-94 : Ear hook type
HS-95 : Neck & arm type
HS-97 : Throat microphone
OPC-2006LS : Allows you to connect the HS-94/HS-
95/HS-97 to the transceiver. After con-
necting, the VOX function can be used.
• LC-179
carrying case
Helps protect the transceiver from scratches, and so
on.
• SJ-1
silicone jacket
• AD-92SMA
antenna connector adapter
Allows you to connect an antenna or antenna cable
with a BNC connector.
• CT-17 -
ci v level converter unit
For remote transceiver control using a personal com-
puter equipped with an RS-232C port. You can change
frequencies, operating mode, memory channels, and
so on, using your computer.
18-3
microphone
plug adapter cable
headset
or