Icom ID-51A Advanced Instructions page 256

Previous view
16
MENU SCREEN
Scan items (Continued)
■
Deleting the link channel
Push D-pad( ) to select the programmed scan link number that the chan-
q
nel you wish to delete is assigned to, and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select programmed scan number you wish to delete.
w
Push [QUICK] .
e
r Push D-pad() to select "Delete," and then push D-pad(Ent).
• The channel is deleted.
Push [MENU] to exit the Menu screen.
t
Program scan link name programming
q Push D-pad() to select a program scan link number between 0 and 9.
Push [QUICK] .
w
e Push D-pad(Ent) to enter the name edit mode.
r Rotate [DIAL] to select the first character of the name you wish to program.
• The selected digit blinks.
• Push D-pad() to move the cursor backward or for-
ward.
• While selecting a character, push [QUICK]
change the character to an upper case or lower case
letter.
• While selecting a digit, push [QUICK]
the input mode selection window.
• A space can be selected in any input mode selected.
• Rotate [DIAL] counter clockwise to enter a space.
• Push [CLR] to delete the selected character,
or hold down [CLR]
characters, first to the right, and then to the left of the
cursor.
• See page 2-7 for programming details.
t Push D-pad() to move the cursor to the second digit.
y Repeat steps r and t to enter a name of up to 16 characters, including
spaces.
u After entering the name, push D-pad(Ent) to save.
Push [MENU] to exit the [MENU] screen.
i
16-21
(For example: 01: 144.000-450.000)
to
to open
to continuously delete the
(For example: Area 5 D-Star )
(For example: A)
Selected character type