D Irectly Inputting (Ur) - Icom ID-51A Advanced Instructions

Previous view
8
D-STAR OPERATION <BASIC>
"TO" (Destination) setting (Continued)
■
D Directly inputting (UR)
The destination station call sign can be directly input.
Hold down for 1 second.
q
• The DR mode is selected.
Push D-pad( ) to select "TO," and then push D-
w

pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Direct Input (UR)."
e 
Push D-pad(Ent) to enter the edit mode.
r
Rotate [DIAL] to select a desired character.
t
(Example: J)
• A to Z, 0 to 9, / and a space can be selected.
• Rotate [DIAL] counter clockwise to enter a space.
• Push [CLR] to delete the selected character, or hold
down [CLR] to continuously erase the characters,
first to the right, and then to the left of the cursor.
Push D-pad( ) to move the cursor to the second
y
digit.
Repeat steps t and y to enter a call sign of up to 8
u
characters, including spaces.
(Example: First, J, then M, then 1, then Z, then L,
then K.)
After entering, push D-pad(Ent) twice to program.
i
• "JM1ZLK" is displayed on "TO."
• After programming, you can correct the call sign in the
DIRECT INPUT (UR) screen.
• The programmed call sign remains on the DIRECT IN-
PUT (UR) screen, until inputting a new call sign.
If the programmed call sign is duplicated in "Your
Call Sign" memory, the name is displayed. (Only
when the name has been programmed.)
[DIAL]
8-14
Example: Directly input the call sign "JM1ZLK."
Completed