Dgps Message Programming - Icom ID-51A Advanced Instructions

Previous view
10
GPS/GPS-A OPERATION
Transmitting GPS data (Continued)
■
D GPS message programming
Enter a GPS message of up to 20 characters to be
transmitted with the position data.
Push [MENU] .
q
Push D-pad( ) to select the root item ("GPS"), and
w
then push D-pad(Ent) to go to the next screen.
D-pad
(Ent)
(�)
( MENU > GPS > GPS TX Mode >
GPS(DV-G) SET > GPS Message)
Refer to the menu sequence shown directly above,
e
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
Push [QUICK] .
r
t Push D-pad() to select "Edit," and then push D-
pad(Ent).
The message editing screen appears.
y
Rotate [DIAL] to select the first character.
u
(Example: O)
• Selectable input characters are Upper case letters, Low-
er case letters, Numbers or Symbols.
• The selected character blinks.
• Push D-pad() to move the cursor backward or forward.
• While selecting a character, push [QUICK]
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
input mode selection window.
• A space can be entered in any input mode selected.
• Rotate [DIAL] counter clockwise to enter a space.
• Push [CLR] to delete the selected character, or hold
down [CLR] to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-7 for programming details.
Push D-pad( ) to move the cursor to the second
i
digit.
Repeat steps u and i to enter a group name of up
o
to 20 characters, including spaces.
!0 After entering, push D-pad(Ent).
!1 Push [MENU] to exit the Menu screen.
Example: Adding "OSAKA suzuki"
to change
to open the
10-17
GPS MESSAGE
screen
Insert a space
after entering
"OSAKA."
Input mode
selection
window