Icom ID-51A Advanced Instructions page 288

Previous view
16
MENU SCREEN
DV Memory items (Continued)
■
Repeater Group (01 to 25)
Repeater group name of up to 16 alphanumeric charac-
Group name
ters
The Skip setting can be turned ON or OFF in the QUICK MENU screen.
Repeater List
NAME Repeater name of up to 16 alphanumeric characters
SUB NAME Repeater sub name of up to 8 alphanumeric characters
CALL SIGN Repeater call sign
GW CALL SIGN Gateway call sign
GROUP Repeater group where the repeater is assigned
Select whether or not to use the repeater as an access
USE(FROM)
repeater (FROM) in the DR mode
FREQUENCY* 1 Operating frequency of the access repeater
DUP* 1 Duplex setting to use the access repeater
1
OFFSET FREQ* Frequency offset to use the access repeater
Position data accuracy level ("None," "Approximate" or "Ex-
POSITION
act")
LATITUDE* 2 Latitude position of the repeater
2
LONGITUDE* Longitude position of the repeater
Time difference between UTC (Universal Time Coordinat-
UTC OFFSET
ed) and the local time
1
* Appears only when USE(FROM) is set to "YES."
* 2 Appears only when POSITION is set to "Approximate" or "Exact."
NOTE: When the repeater is used for a simplex communication, refer to
the list below to set the settings.
Enter the desired name of up to 16 alphanumeric charac-
NAME
ters
Enter the desired sub name of up to 8 alphanumeric char-
SUB NAME
acters
CALL SIGN Blank
GW CALL SIGN —
GROUP Set the desired repeater group
USE(FROM) YES
FREQUENCY Frequency for the Simplex operation
DUP OFF
OFFSET FREQ —
POSITION —
UTC OFFSET —
16-53