Setting And Clearing A Skip Channel - Icom ID-4100A Basic Manual

■ Setting and clearing a Skip channel

You can set or clear a Skip channel setting.
The channels that are set as a Skip channel are skipped
during a scan.
1. Push [V/M] several times until you enter the Memory
mode.
2. Rotate [DIAL] to select the Memory channel.
3. Push [QUICK].
4. Rotate [DIAL] to select "SKIP," then push [ï].
5. Select the option, then push [ï].
• OFF: Cancel the skip setting.
• SKIP: Skipped during a memory scan.
• PSKIP: Skipped during both VFO and memory scans.
• When a Skip channel is set, "SKIP" or "PSKIP" is displayed.
SCAN OPERATION
[MENU]
[ ]
[V/M]
[DIAL]
6
6
[QUICK]
46
BASIC MANUAL