Icom ID-51A Advanced Instructions page 141

Previous view
10
GPS/GPS-A OPERATION
GPS memory operation
■
3. GPS Memory date programming
!2 Push D-pad() to select "DATE," and then push D-
pad(Ent).
• The date edit screen is displayed.
D-pad
(Ent)
(�)
!3 Rotate [DIAL] to edit the date.
• The dates between 2000/01/02 to 2099/12/30 are pro-
grammable.
!4 Push  to move the cursor backward or for-
D-pad( )
ward to select and edit the year, month or day.
!5 Repeat steps !3 and !4 to enter a GPS Memory
date.
!6 After entering the date, push D-pad(Ent).
4. GPS Memory time programming
!7 Push D-pad() to select "TIME," and then push D-
pad(Ent).
• The time edit screen is displayed.
!8 Rotate [DIAL] to edit the time.
• The time between 00:00:00 to 23:59:59 are program-
mable.
!9 Push D-pad() to move the cursor backward or for-
ward to select and edit the hour, minute or second.
@0 Repeat steps !8 and !9 to enter GPS Memory time.
@1 After entering the time, push D-pad(Ent).
5. GPS Memory latitude programming
@2 Push D-pad() to select "LATITUDE," and then push
D-pad(Ent).
• The latitude edit screen is displayed.
@3 Rotate [DIAL] to edit the latitude.
• The latitude between 0°00.00' to 90°00.00' are program-
mable.
If "ddd°mm'ss"" is selected in the POSITION FORMAT
screen, between 0°00'00" to 90°00'00" are programma-
ble.
(MENU > GPS > GPS Set > Position Format)
@4 Push D-pad() to move the cursor to backward or
forward to select and edit degrees or decimal min-
utes.
@5 Repeat steps @3 and @4 to enter a GPS Memory lati-
tude.
• Select "N" to program the north latitude, and "S"
when program the South latitude.
@6 After entering the latitude, push D-pad(Ent).
(Continued)
10-9
Continued on the next page
☞