D Repeat Time Setting; Dtx Monitor Function - Icom ID-51A Advanced Instructions

Previous view
17
OTHER FUNCTIONS
Voice TX function (Continued)
■

D Repeat Time setting

Set the repeat interval to between 1 and 15 seconds (in
1 second steps) for the voice repeat transmittion.
The transceiver repeatedly transmits the recorded
voice audio at this interval.
Push [MENU] .
q
Push D-pad( ) to select the root item (Voice TX),
w
and then push D-pad(Ent) to go to the next screen.
D-pad
(Ent)
(�)
(MENU > Voice TX > TX Set> Repeat Time)
Refer to the menu sequence shown directly above
e
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
Push D-pad( ) to select the repeat interval to be-
r 
tween 1 and 15 seconds (in 1 second steps).
Push [MENU] to exit the MENU screen.
t
D TX Monitor function
Turn the TX Monitor function ON or OFF. (Default: ON)
Push [MENU] .
q
Push D-pad( ) to select the root item (Voice TX),
w
and then push D-pad(Ent) to go to the next screen.
D-pad
(Ent)
(�)
(MENU > Voice TX > TX Set> TX Monitor)
Refer to the menu sequence shown directly above and
e
push D-pad() to select, and then D-pad(Ent) to enter,
one or more times until the last screen is displayed.
Push D-pad( ) to turn the TX Monitor function ON
r
or OFF.
• OFF : The TX voice audio is not output from the speaker.
• ON : The TX voice audio is output from the speaker.
Push [MENU] to exit the MENU screen.
t
17-4