Checking The Configuration; Configuring A Domain; Establishing The Configuration Task - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
The service scheme view is displayed.
Step 4 Run:
dns ip-address
The IP address of the primary DNS server is configured.
Step 5 Run:
(Optional)dns ip-address secondary
The IP address of the secondary DNS server is configured.
----End

1.6.5 Checking the Configuration

Procedure
Step 1 Run the display service-scheme [ name name ] command to view the configuration of a service
scheme.
----End
Example
Run the display service-scheme command to view all the information about the service scheme.
<Quidway> display service-scheme
-------------------------------------------------------------------
service-scheme-name
-------------------------------------------------------------------
huwei1
-------------------------------------------------------------------
Total of service scheme: 1
Run the display service-scheme name name command to view the configuration of service
scheme svcscheme1.
<Quidway> display service-scheme name svcscheme1
service-scheme-name
service-scheme-primary-dns
service-scheme-secondry-dns
service-scheme-adminlevel

1.7 Configuring a Domain

This section describes how to configure a domain on the S3700.

1.7.1 Establishing the Configuration Task

Applicable Environment
To perform authentication and authorization for a user logging in to the S3700, you need to
configure a domain.
Issue 01 (2011-07-15)
: svcscheme1
: -
: -
: 16
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
scheme-index
0
27