Tensioning Device - SSANGYONG 1999 Musso Service Manual

TENSIONING DEVICE

Preceding Work : Removal of poly v-belt
1 Belt (L = 2245)
2 Bolt Combi(M8 x 14, 3 pieces) + Washer
....................................................... 22.5-27.5Nm
Removal & Installation Procedure
1. Remove the poly v-belt.
2. Remove the tensioning pulley by turning its mounting nut
counter clockwise as shown in figure.
Installation Notice
Tightening Torque
3 Water Pump Pulley
4 Nut
5 Tensioning Pulley
40.5 - 49.5 Nm
M162 ENGINE MECHANICAL 1B1-27