SSANGYONG 1999 Musso Service Manual page 112

3. Remove the cooling fan and the viscous clutch. Unscrew
the three bolts from the cooling fan bracket and remove the
bracket (arrows).
Installation Notice
Tightening Torque
4. Remove the timing gear case cover after unscrewing the
bolts (3) and (4) from the timing gear case cover and the
bolt (9) from the oil pan.
Notice
Be careful not to damage the oil pan gasket.
Installation Notice
Tightening Torque
Apply the sealant after cleaning the timing gear case
cover surface.
Be careful not to stain the oil chamber of chain tensioner
with the sealant.
5. Installation should follow the removal procedure in the
reverse order.
6. Warm up the engine and check for oil leaks.
22.5 - 27.5 Nm
Bolt (3,4) 22.5 - 27.5 Nm
Bolt (9) 9 - 11 Nm
M162 ENGINE MECHANICAL 1B1-39