Engine Cranking At The Front Of Crankshaft - SSANGYONG 1999 Musso Service Manual

ENGINE CRANKING AT THE FRONT OF CRANKSHAFT

Preceding Work : Removal of cooling fan
1 Torque Wrench
2 Socket
3 Vibration Damper Ass'y
Notice
Remove the negative ground cable before proceeding the work.
Rotate the pulley in normal engine rotating direction when cranking.
Tools Required
000 589 10 99 01 Torque Wrench
001 589 65 09 00 Socket
GENERAL ENGINE INFORMATION 1A2-9
4 Center Bolt (M18 ´ 55, 1piece)
..................................... 1st Step 200Nm + 20Nm
2nd Step 90° + 10°