Esc+/ Form Overlay Recall - SATO LC400e Series Programming Reference Manual

7.11 Modification
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se

7.11 ESC+/ Form Overlay Recall

Form Overlay Recall
ESC
HEX Code
<1B>
16
Default Value NIL
Valid Range &
When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
To specify Form Overlay Recall
[Format]
</>
[Coding Example]
<A>
</>
<V>200<H>100<P>0<$>B,100,100,6
<$=>SATOPRINTER
<V>720<H>150<B>102100*95000012345*
<Q>2
<Z>
[Supplementary Explanation]
1. Form Overlay Recall Specification </> recalls the registered content by the Form Overlay Registration Specification <&> and then
print it out.
2. If Form Overlay Recall Specificatin </> is detected at normal print data, it proceed to printing with the composition of drawing data
stored in the form overlay.
M-8400RVe CL608e/612e
M-84Pro-2/3/6 LC408e/412e
/ Parameter
<2F> NIL
16
The set command is not maintained
The set command is valid until the next specification is made
The set command is valid until the next specification is made
M-5900RVe M-10e
ESC+/
32