Get Started; Attach The Power Cord - SATO Argox I4 Series User Manual

2 Get started

2 Get started
This chapter describes how to set up your printer.

2.1 Attach the power cord

1. Make sure the power switch is set to the OFF position.
2. Place the printer within cable distance of the host and printer (USB or
Serial cable.)
3. Isolate the power cord from other electrical cables.
4. Plug the other end of the AC power cord into the wall socket.
Warning Do not plug the AC power cord with wet hands, or operate
the printer and the power supply in an area where they may get wet.
Serious injury may result from these actions!
9
Attach the power cord