Reset Your Printer - SATO Argox D2-250 User Manual

3 Printer operation

3.3 Reset your printer

By resetting your printer, you can return your printer to the state it was in
when you receive it. This can help you solve some problems caused by
settings changed during the printing.
Do the following to reset your printer:
1. Turn off the printer.
2. Press and hold the FEED button, and turn on the printer.
3. Both status lights glow solid Amber for a few seconds. Next, they turn to
green shortly, and then turn to other colors. When both lights turn to
red, release the FEED button immediately.
4. Press and hold the FEED button over 3 seconds and release it. Both
status lights blink red three times, and turn to solid Amber for a few
seconds. After the printer is reset, LED 1 goes out while LED 2 turns to
solid green.
Important In step 4, if you do not hold the FEED button long enough,
LED 1 will blink Amber three times while LED 2 goes out. It means the
printer is not reset.
33
Reset your printer