Section 4. Programming Reference
4.6 Rotated Fields
The M-5900RV printer can rotate each print field in 90
Rotate command. There are two variations of this command.
<ESC>% - The field rotates, but the base reference point for the field
<ESC>R - The field and the base reference point rotate.
The following data stream will rotate the print field but will not change the base
reference point of the field.
<ESC>A
The following data stream will rotate both the field and the base reference point
for that field.
<ESC>A
Page 4-10
SATO M-5900RV Operator and Technical Reference Manual
remains the same.
<ESC>%1<ESC>V800<ESC>H200<ESC>L0202<ESC>XB1E<ESC>Q1<ESC>Z
<ESC>R<ESC>V0200<ESC>H0100<ESC>L0202<ESC>P02<ESC>XB1E<ESC>Q1<ESC>Z
increments using the
0
PN 9001081
Rev. C