Internal Errors - SATO WS208 Technical Manual

4 Troubleshooting

4.2 Internal Errors

Error
Flash ROM on the CPU board
error or USB memory error.
An erase error has occurred
when formatting the USB
memory.
Unable to save files due to
insufficient USB memory.
Command error.
An EEPROM for backup cannot
be read or written properly.
A command has been fetched
from an odd address.
Word data has been accessed
from a place other than the
boundary of the word data.
Long word data has been
accessed from a place other
than the boundary of the long
word data.
An undefined command in a
place other than the delay slot
has been decoded.
An undefined command in the
delay slot has been decoded.
A command which rewrites the
data in the delay slot has been
decoded.
Solution
￭
Check your USB flash drive and see if it
works properly.
￭
Make sure your USB flash drive is tightly
plugged.
￭
The flash ROM or USB drive is damaged.
Replace it.
￭
Delete the files on your USB drive to free
some space, or replace your USB drive
with an empty one.
￭
Press the FEED button.
￭
Turn off your printer, and turn it on
again.
￭
It is possible that the EEPROM is
damaged. Replace it or the main board.
￭
Check your commands and make sure
they are correct.
24
Internal Errors