6)
Install the two process unit grips [7].
Figure 4-905A
7)
Slide out the process unit [4] fully to the front.
Figure 4-906A
COPYRIGHT © 2001 CANON INC.
[7]
[4]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
2. Removing the Developing
Assembly/Cleaning Unit
1)
Remove the screw [1] (w/ spring).
Figure 4-907A
2)
Pull out the positioning pin [2].
Figure 4-908A
[1]
[2]
4-81