Canon 1000 Service Manual page 408

5. INSTALLATION
Step
9 Remove the two screws used to fix the
side guide plate (rear/front) in place,
and detach the side guide plate.
10 Loosen the three adjusting screws each
to adjust the upper mounting plate
(rear/front) of the side guide plate as
specified.
Take care not to change the
paper width.
11 If the displacement is appreciable,
loosen the three adjusting screws each
of the lower mounting plate (rear/front)
of the side guide plate to make
adjustments.
12 After adjusting the left/right registration,
mount the side guide plate and the deck
heater.
5-34
COPYRIGHT © 2001 CANON INC.
Work
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Screws
Screws
Screws
Screws
Screws