Canon 1000 Service Manual page 302

4. MECHANICAL SYSTEM
b. By Removing the Transfer Unit from the
Copier
1) Remove the transfer belt assembly. (See 5.
"Removing the Transfer Belt Assembly.")
2) Place the transfer belt assembly as shown,
and loosen the fixing screw [1] on the rear
releasing lever.
[1]
Figure 4-422A
3) Move and place the transfer belt assembly as
shown, and remove the mounting screw [3];
then, remove the transfer belt assembly inlet
plate [2].
[3]
[2]
Figure 4-423A
4-48
COPYRIGHT © 2001 CANON INC.
4) Remove the mounting screw [5], and release
the metal fixing (front) [4].
5) Release the rear releasing lever [6].
6) Bend the link roller assembly [7] in the
direction indicated, and detach the belt [8].
[7]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
[5]
[4]
Figure 4-424A
[6]
Figure 4-425A
[8]
Figure 4-426A