No. 2 Scoop-Up Sheet; Removing The No. 2 Scoop-Up Sheet - Canon 1000 Service Manual

4) Remove the two mounting screws [4], and
remove the shutter cover [3].
Clean the shutter cover with lint-free paper.
[4]
Figure 4-907E
5) Remove the spring [5], and remove the shutter
[6].
Clean the shutter with lint-free paper.
Figure 4-908E
COPYRIGHT © 2001 CANON INC.
[3]
[3]
[4]
[5]
[6]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
6) Clean the SALT sensor inside plastic sheet
[7], shutter contact member [8] with lint-free
paper moistened with alcohol.
Use dry lint-free paper for the SALT sensor
face [9].
[8]
Figure 4-909E
7) Install all parts by reversing the steps used to
remove them.
8) Check to make sure that the shutter moves
smoothly.
F. No. 2 Scoop-Up Sheet
1. Removing the No. 2 Scoop-Up
Sheet
1) Remove the SALT sensor unit.
2) Remove the two screws [1], and remove the

No. 2 scoop-up sheet [2].

[1]
Figure 4-901F
[9]
[7]
[2]
[1]
4-93