Canon 1000 Service Manual page 208

3. OPERATION AND TIMING
5. Point of Retention
In continuous copying, the point of retention on the transfer belt varies depending on the selected
copying mode and type of paper. See Table 3-609 for a list of retention modes and Figure 3-634 for points of
retention that correspond to the modes. (The table also discusses the degree of shine.)
One-sided/
Source of paper
two-sided
Cassette One-sided
Paper deck One-sided
Two-sided
Duplexing unit
(2nd side)
One-sided/
Multifeeder
two-sided
(2nd side)
The CLC1000 varies the fixing speed to a specific speed to provide appropriate shine on the
copies.
A higher fixing speed decreases the shine, producing a matte effect. A lower fixing speed, on
the other hand, increases the shine, producing a glossy effect.
3-164
COPYRIGHT © 2001 CANON INC.
Type of paper Shine
Thin paper
Matte
(64 to 79 g/m 2 )
Standard
Plain paper
(80 to 105 g/m 2 )
Glossy
Transparency Standard
Thin paper
Matte
2
(64 to 79 g/m )
Standard
Plain paper
2
(80 to 105 g/m )
Glossy
Plain paper Standard
(105 g) Glossy
Standard
Plain paper
2
(80 to 105 g/m )
Thin paper
Glossy
2
(64 to 79 g/m )
Thick paper Standard
(106 to 157 g) Glossy
Thick paper Standard
(158 to 209 g) Glossy
Transparency Standard
Table 3-609
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Mode of retention to transfer belt
A3/279 mmx432 mm
A4/LTR
(11''x17'')
D E
A B
F G
E G
D
A
F
I H
F G
I H
F
G
F G
E G
E G
E G
E G
A4R/B4
F
C
E
G
B
E
B
E
E
G
G
G
G