Removing The Power Supply Cooling Fan (Fm17/18) - Canon 1000 Service Manual

4. Removing the Power Supply
Cooling Fan (FM17/18)
• Removing the Filter
1) Remove the the two screws [1], and remove
the filter cover [2].
[1]
[2]
Figure 4-104C
2) Remove the the two screws [3], and remove
the filter cover [4].
[3]
[4]
Figure 4-105C
COPYRIGHT © 2001 CANON INC.
[1]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
• Removing the Power Supply Cooling Fan
(FM17/18)
1) Remove the rear cover 1/2.
2) Disconnect the three connectors [1], and
remove the four screws [2]; then, remove the
fan mount [3].
[1]
[2]
Figure 4-106C
3) Remove the four screws [4], and remove the
power supply cooling fan [5].
[4]
[5]
[4]
Figure 4-107C
[1]
[3] [2]
4-5