Canon 1000 Service Manual page 5

The following rules apply throughout this Service Manual:
1. Each chapter contains sections explaining the purpose of specific functions and the relationship
between electrical and mechanical systems with reference to the timing of operation.
In the diagrams,
the symbol
The expression "turn on the power" means flipping on the power switch, closing the front cover, and
closing the delivery unit cover, which results in supplying the machine with power.
2. In the digital circuits, '1' is used to indicate that the voltage level of a given signal is "High," while '0' is
used to indicate "Low." (The voltage value, however, differs from circuit to circuit.) In addition, the
asterisk (*) as in "DRMD*" indicates that the DRMD signal goes on when '0'.
In practically all cases, the internal mechanisms of a microprocessor cannot be checked in the field.
Therefore, the operations of the microprocessors used in the machines are not discussed: they are
explained in terms of from sensors to the input of the DC controller PCB and from the output of the
DC controller PCB to the loads.
The descriptions in this Service Manual are subject to change without notice for product improvement or
other purposes, and major changes will be communicated in the form of Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this Service Manual
and all relevant Service Information bulletins and be able to identify and isolate faults in the machine.
COPYRIGHT © 2001 CANON INC.
represents the path of mechanical drive; where a signal name accompanies
, the arrow indicates the direction of the electric signal.
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
iii