Canon 1000 Service Manual page 401

Step
12 Remove the five screws from the
copier. (The screws will not be used.)
13 Match the cut-off in the paper deck
lower frame and the guide pin of the
copier; then, install the paper deck to
the copier using five screws. (Be sure
to use the screws that come with the
copier.)
14 Install the metal fixing where indicated.
(2 mounting screws)
COPYRIGHT © 2001 CANON INC.
Work
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
5. INSTALLATION
Remarks
Screw to remove
Screw
Metal fixing
Screws
5-27