Multifeeder Assembly; Removing The Multifeeder Tray Assembly; Removing The Multifeeder Assembly; Removing The Multifeeder Assembly Pick-Up Roller - Canon 1000 Service Manual

C. Multifeeder Assembly
1. Removing the Multifeeder Tray
Assembly
1) Remove the front right cover and the rear
cover.
2) Remove the multifeeder cover 1/2.
3) Remove the two screws [1], and remove the
face cover [2].
[2]
[1]
Figure 4-301C
4) Disconnect the connector 1 [3], and remove
the four screws [4]; then, remove the
multifeeder tray assembly [5].
[4] [3]
[4]
Figure 4-302C
COPYRIGHT © 2001 CANON INC.
[5] [4]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
2. Removing the Multifeeder
Assembly
1) Remove the multifeeder tray assembly.
2) Disconnect the four connectors [1], and
remove the two screws [2]; then, shift the
multifeeder assembly [3] in the direction of the
arrow, and remove it to the front.
[3]
[2]
Figure 4-303C
3. Removing the Multifeeder
Assembly Pick-Up Roller
1) Remove the two screws [1], and remove the
multifeeder pick-up roller cover [2].
2) Remove the two E-rings [3] (resin), and
remove the two pick-up rollers [4].
[4] [3]
[4]
Figure 4-304C
[1]
[2]
[3]
[1]
4-35