Standards And Adjustments; Image-Related Parts - Canon 1000 Service Manual

II. STANDARDS AND ADJUSTMENTS
A. Image-Related Parts
1 Non-Image Width
The non-image width on copies made in Direct
with original detection OFF must be as follows:
Leading edge: 2.5 ±1.5 mm (2.5 ±2.0 mm)
Left/right: 2.0 ±1.0 mm (2.0 ±1.5 mm)
The value in parentheses refers to the second
side of a two-sided copy.
0 2 4 6 8 10 12 14 16 18 20
Figure 7-201 Leading Edge Non-Image Width
2.0±1.0mm
10
Figure 7-202 Left/Right Non-Image Width
COPYRIGHT © 2001 CANON INC.
2.5±1.5mm
0
2
4
6
8
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
2 Image Margin
The image margin on copies made in Direct
with original detection OFF must be as follows:
Leading edge: 2.5 ±1.5 mm (2.5 ±2.0 mm)
Left/right:
The value in parentheses refers to the second
side of a two-sided copy.
0 2 4 6 8 10 12 14 16 18 20
Figure 7-203 Leading Edge Margin
Figure 7-204 Left/Right Image Margin
2.0 ±1.0 mm (2.0 ±1.5 mm)
2.5±1.5mm
2.0±1.0mm
0
2
4
6
8
10
7-7