Canon 1000 Service Manual page 416

5. INSTALLATION
Step
15 Peel the protective sheet from the
control panel ratings plate of the control
card.
16 Attach the control panel ratings plate of
the control card to the control panel.
17 Fix the back cover to the control panel
with 13 screws; then, connect the
control relay connector to the control
panel.
18 Fix the control panel relay harness and
the relay harness for the control panel
in place with the wire saddles on the
control panel back cover; then, install
the control panel by reversing the steps
used to remove it.
19 Return the hopper assembly back to its
original position, and fix it in place; then,
install the left and right covers of the
hopper assembly, and close the front
covers.
20 Turn on the copier's power switch, and
check the operation of the control card.
5-42
COPYRIGHT © 2001 CANON INC.
Work
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks