Canon 1000 Service Manual page 329

[6]
Figure 4-713A
5) In the case of the Bk hopper, remove the
screw [7] and the E-ring [8], and disconnect
the two connectors [9] from the front; then,
remove two screws [10] from the back.
[9]
[7]
[8]
Figure 4-714A
COPYRIGHT © 2001 CANON INC.
[9]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
[10]
Figure 4-715A
When installing the hopper, take ex-
tra care so that the toner supply
shutter [1] will not interfere with the
gear of the drive unit; otherwise,
toner may spill.
[1]
Figure 4-716A
4-75