Canon 1000 Service Manual page 530

7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
3) Tap the waste toner vertical pipe [2] with a screwdriver so that the toner will fall from the pipe.
4) Turn the waste toner feeding motor [3] in the direction of the arrow so that the screw gear [5] moves away
from the microswitch lever [4]. (If it does not move, the pipe is still filled with waste toner. Perform step 3)
once again.)
5) Turn on the power switch.
6) Execute 'FUNC' > 'F-MISCp' > 'MTR' in service mode to rotate the waste toner feeding motor. Check if
the rotation is stable.
7) Dispose of the waste toner collecting inside the waste toner box.
7-94
COPYRIGHT © 2001 CANON INC.
[2]
Figure 7-402
[4]
[5]
Figure 7-403
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3]