Scheduled Servicing - Canon 1000 Service Manual

B. Scheduled Servicing
Parts Tools/solvents
Pattern reading unit Lint-free paper
(LED/shutter) Blower brush
Separation/Pre-fixing Alcohol
charging assembly Lint-free paper
Alcohol
Scanner rail
Alcohol
Standard white plate
Lint-free paper
No. 1 through No. 3 mirror
Blower brush
Reflecting shade
Parts Tools/solvents
Alcohol
Oil applying blade
Lint-free paper
Solvent
Thermistor (upper / lower)
Lint-free paper
Solvent
Upper separation claw
Lint-free paper
Parts Tools/solvents
Alcohol
Oil removing blade
Lint-free paper
Inlet guide plate
Solvent
Lint-free paper
Transfer blade
Cotton swab
Waste toner box
COPYRIGHT © 2001 CANON INC.2001200120012001CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Work/remarks
Cleaning (Note 1)
Cleaning
Cleaning (Note 4)
Cleaning (Note 4)
Cleaning (Note 2)
(Note 4)
Work/remarks
Cleaning
Cleaning
Cleaning
Work/remarks
Cleaning
Cleaning
Cleaning
Collecting the box
Parts
Primary/pre-primary
charging assembly
Cleaner side seal
Cleaner end seal
Scoop-up sheet
No. 2 scoop-up sheet
SALT sensor/Shutter
Tools/solvents Work/remarks
Alcohol
Cleaning
Lint-free paper
Blower brush Cleaning (Note 3)
Lint-free paper
Cleaning (Note 3)
Blower brush
Lint-free paper
Cleaning (Note 3)
Blower brush
Lint-free paper
Dry-wiping; do not use
Blower brush
solvent.
Parts Tools/solvents
Lint-free paper
Dust-proofing glass Cleaning (Note 3)
Blower brush
Pick-up/feeding/separation Alcohol
Cleaning
roller Lint-free paper
Note 1:
Take care not to apply force to the LED or to keep the CCD free of dust.
Note 2:
Take care not to touch the mirror or the lens and to keep the CCD free of dust.
Note 3:
Perform when performing the photosensitive drum.
Note 4:
At time of replacing the scanning lamp.
Work/remarks
7-5