Orientation Of The Paper Deck; Pick-Up Roller - Canon 1000 Service Manual

7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
5

Orientation of the Paper Deck

Pick-Up Roller

When installing the pick-up roller to the pick-up
roller shaft, make sure that the marking is to the
rear.
Pick-up roller
Figure 7-247
6 Orientation of the Paper Deck
Pick-Up/Feeding Roller
When installing the pick-up/feeding roller, make
sure that the marking is to the rear.
Markings
Bearing
(one-way)
Figure 7-248
7-28
COPYRIGHT © 2001 CANON INC.
7
1) When installing the separation rubber roller,
make sure that the marking is to the rear (cou-
pling side).
Marking
Rear
2) When installing the separation roller, make
sure that the orientation identification rib on the
roller collar is to the front.
E-ring Bearing
Rear
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Orientation of the Paper Deck
Separation Roller
Figure 7-249
Identification rib
Front
Roller collar
Figure 7-250
Markings
Coupling
Pin