4. MECHANICAL SYSTEM
a. When installing the pick-up roller
[1] to the pick-up assembly,
make sure that the round mark
ing [2] on the rubber portion is
toward the front of the machine.
[1]
Figure 4-303B
The pick-up roller is identified by the
color of its collar as follows:
front:
rear:
b. Do not remove the rubber por
tion of the pick-up roller from the
collar.
4-28
COPYRIGHT © 2001 CANON INC.
[2]
Front of
machine
gold
silver
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
3. Removing the Feeding Roller
1)
Remove the pick-up assembly.
2)
Remove the screw [1], and remove the upper
guide [2].
Figure 4-304B
3)
Remove the screw [3], and remove the pick-
up roller arm bushing [4].
[4]
Figure 4-305B
[1]
[2]
[3]