Canon 1000 Service Manual page 391

Step
13 The initial ATR-related readings will be indicated on the 3rd/4th screen under 'INSTALL'. Record
the readings on the service data sheet. (Press the
service data sheet is attached behind the document compartment of the front cover (left).
DISP COUNTER
ADJUST
FUNC
OPTION
TEST
DISP COUNTER
ADJUST
FUNC
OPTION
TEST
14 Press the
DISP COUNTER
ADJUST
FUNC
OPTION
TEST
15 Press REG-APER
position correction.
Before executing 'REG-
APER', check to make sure
that the transfer unit is at
locking position.
16 Press the Reset key twice to end
service mode.
17 Pull out the cover switch actuator, and
close the front cover.
COPYRIGHT © 2001 CANON INC.
Work
<M>
INSTALL
SGNL-Y SGNL-M
REF-Y REF-M
SIGG-Y SIGG-M
<M>
INSTALL
SGNL-S-Y SGNL-S-M
REF-S-Y REF-S-M
SGNL-D-Y SGNL-D-M
SIGG-D-Y SIGG-D-M
key to bring up the 2nd screen of 'INSTALL'. Press
<M>
INSTALL
IMG-REG LSNS-KIL
0
REG-APER
0
RECV-Y RECV-M
0
to execute image
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
key to scan through the screens.) The
<S> <R>
3/4
SGNL-C
REF-C
SIGG-C
<S> 4/4 <R>
SGNL-S-C
REF-S-C
SGNL-D-C
SIGG-D-C
<S> <R>
2/4
1
RECV-C
0 0
5. INSTALLATION
Remarks
<P> <F>
<P> <F>
SGNL-S-K
REF-S-K
SGNL-D-K
SIGG-D-K PT-OFST-K
IMG-REG to select '1'.
<P> <F>
RECV-K
0
5-17