Externals - Canon 1000 Service Manual

E. Preventing Deformation of Externals
Step
1 To protect the externals from
deformation, remove the upper
cassette, lower cassette, waste toner
cover, right front cover, and front lower
cover.
2 Remove the harness base (cassette
lower) secured to the base plate with
three screws.
3 Attach the harness base temporarily to
the cassette holder by means of duct
tape or the like.
4 Detach the rear cover 1, 2, 3 cover.
COPYRIGHT © 2001 CANON INC.
Work
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Waste toner cover
Upper cassette
Lower cassette
Screws
Tape
Cable mount
rear cover 2
5. INSTALLATION
Remarks
Right front cover
Front lower cover
Screw
rear cover 1
rear cover 3
5-19