Separation/Pre-Fixing Assembly; Removing The Separation/Pre-Fixing Assembly; Routing The Gut Wire - Canon 1000 Service Manual

B. Separation/Pre-Fixing
Assembly
1. Removing the Separation/Pre-
Fixing Assembly
1) Open the left and right front covers, and
emove the hopper left cover; then, pull out the
separation/pre-fixing charging assembly 1 (1
connector [2], 1 mounting screw [3]).
[2]
[1]
Figure 4-801B

2. Routing the Gut Wire

Route the gut wire as shown in Figure 4-802B.
Screw
w/washer
Figure 4-802B
COPYRIGHT © 2001 CANON INC.
[3]
Gut wire
Screw
w/washer
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
4-79