Deck Settings For The Paper Deck; Data-Con (Disconnecting The Copy Data Controller-A1) - Canon 1000 Service Manual

4. DECK (settings for the Paper Deck)
DISP COUNTER
ADJUST
FUNC
OPTION
TEST
Item
DECK-SET
(Note 1)
DECK-P
(Note 1)
Note 1:
You must enter the appropriate value whenever you have replaced the reader controller PCB or initial-
ized a RAM; record any new values on the service label for this purpose.

5. DATA-CON (disconnecting the Copy Data Controller-A1)

DISP COUNTER
ADJUST
FUNC
OPTION
TEST
Item
B-CLR
COPYRIGHT © 2001 CANON INC.
<M> <S>
DECK
DECK-SET DECK-P
1
Description
Specifies the presence/absence of a paper deck.
0: Absent
1: Present
Selects the size of paper used in the paper deck.
Each press on the key scans through the sizes
as follows:
A3 B4 11×17 B5 LTR A4
<M> <S>
DATA-CON
B-CLR
0
Description
Connecting the Copy Data Controller-A1 will
automatically sets it to '1' from '0'.
Be sure to set it to '0' when temporarily separat-
ing the Copy Data Controller-A1 during service
work.
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
<R>
READY
A4
<R>
READY
<P> <F>
READY
Remarks
Standard: 1
Standard: A4
<P> <F>
READY USER
Remarks
'E717' will be indicated if
you separate the Copy
Data Controller-A1 without
setting it to '0'.
7-291