Canon 1000 Service Manual page 327

[6]
Figure 4-705A
5) Release the lock [7] found in the lower left of
the hopper.
6) Return the hopper assembly [8] where the
middle position metal fixing [8] installed in step
4) is located.
[6]
Figure 4-706A
7) Remove the screw [9] from the left grip
assembly.
Figure 4-707A
COPYRIGHT © 2001 CANON INC.
[8]
[7]
[9]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
8) Secure the hopper assembly [8] to the midway
metal fixing (left, right) with screw each [10].
Figure 4-708A
9) Lift the right end of the control panel, and push
in the slider [11] to remove the control panel.
[11]
Figure 4-709A
10) Lift the hopper assembly by holding it on its
top left and right to remove.
[8]
[10]
4-73