Canon 1000 Service Manual page 271

7) Remove the screw [3] used in step 5).
8) Loosen the screw on the mirror positioning
tool (FY9-3002-000), and extend the arm [6]
fully.
[6]
Figure 4-208D
9) Install the mirror positioning tool [7] between
the No. 1 mirror mount and the No. 2 mirror
mount; and insert the pin [8] that comes with
the mirror positioning tool.
[8]
Figure 4-209D
COPYRIGHT © 2001 CANON INC.
[7]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
Figure 4-210D
10) Install the metal fixing [10] of the scanner
cable to the No. 1 mirror mount using the hole
in the side plate with two screws [9].
[9]
Figure 4-211D
[10]
Figure 4-212D
[7]
[8]
[10]
[9]
4-17