Duplexing Unit; Releasing The Lifter; Removing The Duplexing Unit; Removing The Duplexing Assembly Feeding Roller - Canon 1000 Service Manual

6. Releasing the Lifter

1) Remove the rear right cover.
2) Push down the lifter releasing lever [1] with a
screwdriver [2] or the like.
[1]
Figure 4-308C (right rear)
COPYRIGHT © 2001 CANON INC.
[2]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
D. Duplexing Unit

1. Removing the Duplexing Unit

1) Remove the front right cover.
2) Slide out the duplexing unit.
3) Remove the waste toner cover.
4) Remove the screw [1] (one each) and the left
and right stoppers [2]; then, remove the

duplexing unit [3].

[2]
[1]
[3]
Figure 4-301D
2. Removing the Duplexing Assembly
Feeding Roller
1) Remove the duplexing unit.
2) Remove the two grip rings [1], and remove the
two paper feeding rollers [3] from the paper
feeding roller shaft [2].
[1]
[3]
Figure 4-302D
[1]
[2]
[1]
[2] [3]
4-37