Primary Suction Fan (Fm8/9); Removing The Scanner Suction Fan (Fm12/13) - Canon 1000 Service Manual

6. Primary Suction Fan (FM8/9)

• Removing the Filter
1) Remove the screw [1] (one each), and remove
the filter covers from the rear cover [2].
Figure 4-112C
2) Remove the filters.
• Removing the Primary Suction Fan
1) Remove the rear cover 2.
2) Disconnect the connectors [1] (one each), and
remove the four screws [2] each; then,
remove the fan [3].
[2]
[1]
Figure 4-113C
COPYRIGHT © 2001 CANON INC.
[1]
[2]
[3]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
7. Removing the Scanner Suction
Fan (FM12/13)
1) Shift up the digital unit.
2) Remove the two screws [1], and shift the
analog processor PCB [2].
[1]
Figure 4-114C
3) Remove the three mounting screws [4], and
disconnect the two connectors [5]; then,
remove the fan guard plate [3].
[5]
[4]
Figure 4-115C
[2]
[3]
[5]
4-7