Opening The Upper Fixing Roller Unit - Canon 1000 Service Manual

8) Remove the screw [11] from the rear of the
upper oil pan; then, wait until all fixing oil has
collected in the oil tank.
Figure 4-1003A
9) Close the upper fixing roller unit.
10) Remove the two screws [12]; while holding the
grips [13], lift the fixing assembly [14] to
remove. At this time, be sure to fit the screw
[9] removed in step 7).
[13]
[12]
Figure 4-1004A
Take care. The oil filter may stick to
the bottom of the fixing assembly
when the assembly is lifted.
COPYRIGHT © 2001 CANON INC.
[11]
[14]
[13]
[12]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
2. Opening the Upper Fixing Roller
Unit
1) Open the front cover (left), shift down the
fixing assembly lever, and slide out the fixing
lever (2 screws).
2) Remove the fixing assembly knob (1 screw),
and remove the fixing assembly lever (2
screws).
3) Remove the two screws, and remove the
fixing assembly front cover.
4) Open the external delivery unit and the
internal delivery unit.
5) Remove the screw, and remove the fixing
assembly upper cover.
6) Remove the two screws [1], and open the
upper fixing roller unit [2].
[1]
Figure 4-1005A
[1]
[2]
4-95