Canon 1000 Service Manual page 446

7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
3) Loosen the three adjusting screws [5]
each, and adjust the upper mounting
plates (rear/front) of the side guide plate.
[5]
Figure 7-211
Take care not to change the paper
width.
4) If the discrepancy is excessive, loosen the
three adjusting screws [6] each, and ad-
just the lower mounting plates (rear/front)
on the side guide plate.
[6]
Figure 7-212
7-10
COPYRIGHT © 2001 CANON INC.
[5]
[6]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)