Canon 1000 Service Manual page 724

7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
Item
THIN-APS
M-RECOVER
Note 1:
You must enter the appropriate value whenever you have replaced reader controller PCB or initialized
a RAM; record any new values on the service label for this purpose.
COPYRIGHT © 2001 CANON INC.
7-288
Description
Use it to enable auto paper selection for thin
paper.
0:disable auto paper selection
1:enable auto paper selection
Thin paper will not be selected if of
the following modes is selected.
REF.
• sort, group, staple
• double-sided
Use it to execute recovery without moving the
scanner for recovery copying after the presence
of a jam or the absence of toner/oil/paper has
been identified.
0: normal operation
1: no re-scanning during recovery copying
Conditions: RDF not used, page separation not
used, auto vertical/horizontal rotation not used,
double-sided copying not used, enlargement
page separation not used, reduced image page
composition not used.
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Standard:0
Standard:0