Canon 1000 Service Manual page 445

• Multifeeder
Turn the screw [1] to move the tray position
so that the standard value is attained.
Figure 7-207
• Two-Sided Copies
Loosen the screw [1], and adjust the position
of the paper guide plate so that the standard
value is attained.
[1]
Figure 7-208
COPYRIGHT © 2001 CANON INC.
[1]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
• Pick-Up from the Paper Deck
1) Remove the four screws [1], and discon-
nect the connector [2]; then, remove the
paper deck heater [3].
[3]
2) Pull out the push locks [4] used to fix the
side guide plates (front, rear) in place, and
remove the side guide plate.
[2]
[1]
Figure 7-209
[4]
Figure 7-210
7-9