Canon 1000 Service Manual page 447

b. Adjusting the Image Margin
DISP COUNTER
ADJUST
FUNC
OPTION
TEST
1) Start service mode, and select ADJUST >
FEED-ADJ.
2) While the FEED-ADJ screen is on, press the
Start key.
3) If the image margin is not as indicated, adjust
the image writing start position in the main
scanning direction using 'UP-ADJ', 'LOW-
ADJ', 'MULT-ADJ', 'DECK-ADJ', and 'REFE-
ADJ' and using 'VSYC-ADJ' in the sub scan-
ning direction.
Then, adjust the non-image width using 'MAR-
GIN-L, -R, -T, -B'.
(For details, see VII. "SERVICE MODE.")
COPYRIGHT © 2001 CANON INC.
<M>
FEED-ADJ <S>
UP-ADJ LOW-ADJ
xxx xxx
REFE-ADJ
xxx
VSYC-ADJ
xxx
MARGN-L MARGN-R
xxx xxx
Figure 7-213
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
<R> <P>
MULT-ADJ DECK-ADJ
xxx
MARGN-T MARGN-B
xxx
<F>
xxx
xxx
7-11