Fuser (Fixing Assembly-Related Adjustment) - Canon 1000 Service Manual

7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS

11. FUSER (fixing assembly-related adjustment)

DISP COUNTER
ADJUST
FUNC
OPTION
TEST
Item
NIP-CHK
E000-RLS
E005-RLS
UPPER-CR
LOWER-CR
COPYRIGHT © 2001 CANON INC.
7-270
<M> <S>
FUSER
NIP-CHK UPPER-CR
E000-RLS LOWER-CR
E005-RLS
Description
Measures the fixing assembly nip.
Paper is stopped once at the point of fixing and
then delivered.
Sine the operation uses cassette 1 as the source
of paper, 'NO PAPER' will be indicated over 'P' if
no paper exists in cassette 1. The notation
changes to 'READY' when paper is supplied.
Clears E000.
Be sure to turn off and then on the power switch
after execution.
Clears E005.
Be sure to turn off and then on the power switch
after execution.
Use it to adjust the fixing temperature value
(upper roller).
If you have replaced the fixing assembly, enter
the value recorded on the label attached to the
fixing assembly.
Thereafter, be sure to turn off and then on the
power switch.
Use it to adjust the fixing temperature value
(lower roller).
If you have replaced the fixing assembly, enter
the value recorded on the label attached to the
fixing assembly.
Thereafter, be sure to turn off and then on the
power switch.
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
<R> <P>
READY
<F>
Remarks
Press NIP-CHK to
execute.
The notation over 'P'
changes from READY
> SERVICE > to
READY to end the
execution.
The notation over 'P'
changes from ERROR
to BUSY and then to
ERROR.
Turn off and on the
power switch to clear.
At time of shipment:0
Settings:–3 to +3
Do not enter
a value other
than the one
indicated on
the label.