Canon 1000 Service Manual page 694

7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
DISP COUNTER
ADJUST
FUNC
OPTION
TEST
Entering Backup Data
If you have executed 'RAM-CLR' for the DC controller PCB, use this screen to enter the data recorded on
the label shown in Figure 7-702.
Item
UP-A4R Enters the adjustment value for paper width detection reference point 1 for cassette 1.
UP-STMR Enters the adjustment value for paper width detection reference point 2 for cassette 1.
LOW-A4R Enters the adjustment value for paper width detection reference point 1 for cassette 2.
LOW-STMR Enters the adjustment value for paper width detection reference point 2 for cassette 2.
MF-A4R Enters the adjustment value for paper width detection reference point 1 for the
multifeeder.
MF-A6R Enters the adjustment value for paper width detection reference point 2 for the
multifeeder.
MF-A4 Enters the adjustment value for paper width detection reference point 3 for the
multifeeder.
7-258
COPYRIGHT © 2001 CANON INC.
<M> <S>
DC-CON
2/5
UP-A4R UP-STMR
xxxx
xxxx
LOW-A4R LOW-STMR
xxxx xxxx
MF-A4R MF-A6R
xxxx
xxxx
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
<R> <P>
READY
MF-A4
xxxx
Description
<F>