Laser System; Laser Unit; Making Preparations For Laser Unit-Related Parts - Canon 1000 Service Manual

4. MECHANICAL SYSTEM
VI. LASER SYSTEM
A. Laser Unit
1. Making Preparations for Laser
Unit-Related Parts
1) Remove the glass retainer right, upper rear
right cover, and digital covers 1, 2, 3, and 4.
2) Remove the two fixing screws [2] of the digital
unit [1]; then, lift it in the direction of the arrow
and fix it in position as shown in Figure 4-
601A.
[1]
[2]
Figure 4-601A (fixing screw)
[1]
Figure 4-602A (fixing position)
4-60
COPYRIGHT © 2001 CANON INC.
3) Remove the two screws [3], and remove the
analog processor PCB [4]; then, fix it in place
in the hooking hole [5] with a screw [6].
[4]
[2]
[5]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3]
Figure 4-603A
[6]
Figure 4-604A