Removing The Scanner Cover - Canon 1000 Service Manual

Color laser copier
Hide thumbs Also See for 1000:
Table of Contents

Advertisement

4. MECHANICAL SYSTEM
5)
Remove the two screws [3], and remove the
two CCD unit retaining springs [4].
[3]
[4]
Figure 4-508A
6)
Lift the CCD unit, and disconnect the two
connectors (J2001 [5] /J2003 [6]); then, remove
the grounding wire mounting screw [7], and
remove the CCD unit.
[7]
[5]
Figure 4-509A
4-58
COPYRIGHT © 2001 CANON INC.

5. Removing the Scanner Cover

1)
2)
3)
[3]
[4]
[6]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Disconnect the power plug.
Remove the copyboard glass.
Remove the four screws [1], and remove the
scanner cover.
[1]
[2]
Figure 4-510A
1. Move the mirror mount fully to
the left.
2. Take care not to damage the
power wire [3] of the scanning
lamp.
Figure 4-511A
3. Pay attention to the bend at the
front.
Figure 4-512A
[1]
[3]

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1000s3100

Table of Contents